![](/v/vspfiles/templates/vasca/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/vasca/images/clear1x1.gif) |
![](/v/vspfiles/templates/vasca/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/vasca/images/clear1x1.gif) |
The Neptune Systems A3 Apex System is a great entry into gaining full control over your tank, giving you everything you need to get up and running at an affordable price. Monitor temperature, pH, surface leaks, and water level with the ability to control additional aquarium equipment with the included EB832. The A3 Series Apex base unit includes a built-in audible alarm and three FMM ports for connecting all fluid monitoring sensors, an upgrade from the A2 Series which required a separate module purchase.
Energy Bar 832
The most comprehensive aquarium controlling and monitoring system to date is finally here. The Energy Bar 832 now has eight individual, 7 amp relayed outlets letting you use any outlet for any device. Each individual outlet can also monitor and detect power usage in amps or watts, letting you set alarms and send emails when pumps have clogged or failed, lights are not turning on, heaters leaking current, letting you be notified of the issue before it becomes a problem. With electricity costing more and more money per Kilowatt hour having the ability to monitor each pump, heater, and light lets you now make better decisions on the overall value of your equipment.
Backwards Compatible and Easily Expandable
If you have any old modules, head units, energy bars, or other Apex accessories they will work flawlessly with the new Apex Controller. Want to add Salinity monitoring? Just connect a PM2 module. Need Dissolved O2 monitoring? Simply add a PM3. The Neptune Systems Apex is expandable and compatible, making it the ultimate reef tank aquarium controller.
NOTE: This version does not have a display. You can use a SmartPhone or your computer for the display. The computer can be wired to the Apex or it can communicate with the Apex through WIFI.
Includes:
- A3 Apex Base Unit
- Apex Energy Bar 832
- 1x Temperature Probe
- 1x pH Probe
- 1x Optical Sensor
- 1x LD-2 Leak Detection Probe (Solid Surfaces)
- 6 foot Aquabus Cable
- Calibration Solutions (7 & 10)
- Mounting Screws
- Getting Started Card
- Note: Apex Display Module, Smart Phone, and Tablet not included.
|
|
![](/v/vspfiles/templates/vasca/images/clear1x1.gif) |
![](/v/vspfiles/templates/vasca/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/vasca/images/clear1x1.gif) |
![](/v/vspfiles/templates/vasca/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/vasca/images/clear1x1.gif)
|